Washing machine thermostat

Washing machine thermostat 1,250V10A,125V/15A 2,bakelite body 3,certificate:VDE,UL,JET,KTL,etc. 4,horizontal terminal Washing machine thermostatProducts InformationKSD1 and KSD series thermostats are one type of small bimetal temperature controllers with shells. The influence of certain ambient temperature on its thermal bimetal disk would result in the deformation of the disc, and its instant movement drives the contact and other components to open or close the electric appliances and equipments. In short, it is a reliable, long-life and non-interference thermal device with fixed working temperature.  The products are suitable for temperature control or overheat protection for such as hot-water heater, kettle, water dispenser, electronic disinfection device, dryer, microwave oven, electric heater, coffee machine, sandwich maker, vacuum cleaner, electric mop, toaster, soybean milk maker, electric irons and other home appliances and other electro-thermal devices and machines like electric motors and copier. Instructions Note:* Don’t let water or other liquid leak into the thermostat.* The surface has to been installed flatly and evenly on the calorific surface.* The body case should not have any crack; the shape of terminal can’t be changed at will.Technical specifications

Electrical Rating	AC 250V Resistive load 10A; Inductive load 8A
	AC 125V Resistive load 15A; Inductive load 12A
	(vacuum cleaner only) AC 250V 10A FLA 40A LRA ;AC 125V 15A FLA 40A LRA
Operating Temperature	0~180 °C
Tolerance	±5°C,±3°C
Differential	10~40 °C
Endurance Test	UL,CUL: (25~180°C) 100000 cycle
	VDE: (0~180°C) 10000 cycle
	CMJ: (150°C) 10000 cycle
	KTL: (0~180°C) 250V/11A 10000 cycle
	CQC: (5~180°C) 250V/10A 10000 cycle
Dielectric Resistance	AC50Hz 1800V for 1second
insulation Resistance	More than 100MΩ (DC500V megger)
Contact Resistance	Less than 50mΩ (DC6V/1A milliohm meter)
Heat Resistance	Max operating temp. 150°C,Max surface temp. 180°C
	Max operating temp. 180°C,Max surface temp. 210°C
Normal Contact Status	Open / Close

Installation requirements

The enters of installing	23.8mm;24mm;25.5mm;30mm
Installing Forms	a. Activity type; b. Fixed type;c. Pressure plate; d. Custom mode
Size	4.75mm×0.5mm or 4.75mm×0.8mm or 6.35mm×0.8mm
Terminal type	horizontal terminal
	vertical terminal
	both terminals 30/40/45 deg bend upward
	It can be custom mode to suit your need

Washing machine thermostat